From the course: Alias Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Tube Flange: Center Radius - Alias Tutorial
From the course: Alias Essential Training
Tube Flange: Center Radius
- In this video we're going to take a look at the first of the Rolled Edge commands. And so under Surfaces, we're going to go to Rolled Edge, and the command we're going to look at is Tube Flange. Let's do a real quick Reset on this. And right at the very top let's change this to Circular, so we're going to go with a very simple scenario and if we look at these four surfaces, they're separate surfaces. And if I Shade them up you can see they're all separate and they have a hole punched out of them in the side view like this. So let's go back to our wire frame and we're going to go ahead and very simply pick on one of these edges. Incidentally, I've got under my Control Options Auto Update, Continuity Check, and Chain Select selected. And we're going to pick that edge. And Tube Flange creates a radius and then a flange on the end of that radius like so. Now in this case here the Tube Flange is created in the wrong direction, I need it to go inboard of that surface, so I'm just simply…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Surface primitives8m 23s
-
(Locked)
Planar surfaces9m 33s
-
(Locked)
Surface sweep extrude5m 47s
-
(Locked)
Multi-Surface Draft6m 54s
-
(Locked)
Bevel and Skin7m 9s
-
(Locked)
Surface Revolve7m 31s
-
(Locked)
Mono-rail sweep surfaces7m 32s
-
(Locked)
Bi-rail sweep surfaces9m 12s
-
(Locked)
Additional notes on sweeps5m 38s
-
(Locked)
Tube Flange: Center Radius6m 51s
-
(Locked)
Tube Flange: Tangent Offset5m 53s
-
(Locked)
Tubular Offset5m 9s
-
(Locked)
Fillet Flange6m 7s
-
(Locked)
Simple fillet16m 2s
-
(Locked)
Freeform Blend8m 18s
-
(Locked)
Profile Blend6m 41s
-
(Locked)
Ball corners (round)7m 54s
-
-
-
-
-
-
-
-
-
-
-