From the course: Alias Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Tube Flange: Tangent Offset - Alias Tutorial
From the course: Alias Essential Training
Tube Flange: Tangent Offset
- In this video, we're going to revisit the Tube Flange function, but, this time we're going to use the Tangent Offset Option. So, let's go ahead and open up Tube Flange and you'll notice at the very top, under Specify, I can change from Center radius which we used before to Tangent offset. So, before we go into this, let's take a look at the data that we're going to be using. So, this data as I mentioned before was four separate pieces of surface. And if I put on the Cv/Hulls, you'll notice that there's actually larger slabs that have been trimmed out from this hull. So, essentially, we have a face here. We've go four faces. So, if I untrim these surfaces. Let's go to Surface Edit. Trim, Untrim, you'll see that's the base or the parent surface. And if I shade that, you'll notice that they encompass that hull. So, let's go back, wireframe, and let's go back to Surface Edit, Trim. I'm going to trim them back like so. Select, spacebar to accept, just click in the middle and spacebar to…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Surface primitives8m 23s
-
(Locked)
Planar surfaces9m 33s
-
(Locked)
Surface sweep extrude5m 47s
-
(Locked)
Multi-Surface Draft6m 54s
-
(Locked)
Bevel and Skin7m 9s
-
(Locked)
Surface Revolve7m 31s
-
(Locked)
Mono-rail sweep surfaces7m 32s
-
(Locked)
Bi-rail sweep surfaces9m 12s
-
(Locked)
Additional notes on sweeps5m 38s
-
(Locked)
Tube Flange: Center Radius6m 51s
-
(Locked)
Tube Flange: Tangent Offset5m 53s
-
(Locked)
Tubular Offset5m 9s
-
(Locked)
Fillet Flange6m 7s
-
(Locked)
Simple fillet16m 2s
-
(Locked)
Freeform Blend8m 18s
-
(Locked)
Profile Blend6m 41s
-
(Locked)
Ball corners (round)7m 54s
-
-
-
-
-
-
-
-
-
-
-