From the course: AutoCAD: 2D & 3D Elevations

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Applying the elevation layers

Applying the elevation layers - AutoCAD Tutorial

From the course: AutoCAD: 2D & 3D Elevations

Start my 1-month free trial

Applying the elevation layers

“

- In the previous video, we had our 03 Elevations 2D House drawing open, which we have in this video as well. We're staying in the same drawing, as I mentioned in the previous video, and saving it as we go through step-by-step, through each video in this chapter. Now in the previous video, we set up some of our elevations layers that we're going to use with things like text, hatching, annotation, and so on. Now all of these layers we're going to build up as we go through the course, obviously. But we're gonna apply some of these elevation layers now in our drawing. Now you'll remember in the previous video, what I did do was apply the walls layer here. So this is now on ELEV_2Dwalls. If I go and look at the walls over here, they're on the PLAN_2Dwalls, where I've renamed the layers in the previous video. Now if you want to, we're not gonna work on the plan at the moment, so you might want to just pan and zoom-in on your elevation. Now, you'll notice here, if I hover over the slab…

Contents