From the course: AutoCAD: Developing A Prefab Unit
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Calculating finished ceiling level (FCL) - AutoCAD Tutorial
From the course: AutoCAD: Developing A Prefab Unit
Calculating finished ceiling level (FCL)
- [Instructor] We're still in our Preparing For 3D.dwg file, and we're in the top left model space view port. The top view; this one here. Now in the previous video, we placed that polyline that represented our finished floor level and we lifted it the 50mm up so it would give us an indication of where the finished floor levels should be, because obviously the floor level is going to be above what might be a concrete slab level for example. We're going to place another polyline now and it's going to be our finished ceiling level. So remember, you do need to change your layer. So in the home tab on the ribbon, into the layers panel and we need to change it to the FCL. A-SERV ... - FCL ... like so. We then come back into our top view here in the top left view port. We're going to go the rectangle command again in the draw panel, and we do the same again. We're going to use this corner here, like so, and take it all the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Setting out and checking local grid and setting out point (SOP)2m 52s
-
(Locked)
Moving from 2D to 3D in AutoCAD3m 16s
-
(Locked)
Utilizing model space viewports4m 2s
-
(Locked)
Developing finished floor level (FFL)3m 24s
-
(Locked)
Calculating finished ceiling level (FCL)3m 35s
-
(Locked)
Checking upper and lower opening levels6m 5s
-
(Locked)
Extruding structural openings4m 38s
-
(Locked)
-
-
-
-
-
-