From the course: AutoCAD 2022 Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Using Break and Join - AutoCAD Tutorial
From the course: AutoCAD 2022 Essential Training
Using Break and Join
- [Instructor] We're going to take a look now at the Break and Join commands available to you in AutoCAD. We're staying in the ModifyingObjects.dwg file, and you can see that we're still zoomed in on the hot desking area that we created previously. Just before we get started, go up to the Modify panel on the Home tab, on the Ribbon, click on the fly outs and just click on the pin. The reason being is the Break commands are there, on the fly out part of the panel. And also, the Join command is right there as well. Now, what we're going to do first is we're going to do a little bit of breaking, and then we'll jump into joining. Now, it's this line here that we're going to be working with, just there like so. And it's the line that forms the internal wall that our hot desking areas are kind of up against, if you get my meaning. Now, we've got two options to break in AutoCAD. You've got this one here, which is Break at Point,…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Selecting objects7m 43s
-
(Locked)
Using Offset and Mirror6m 58s
-
(Locked)
Using Move and Copy6m 14s
-
(Locked)
Using Rotate and Scale6m 42s
-
(Locked)
Creating and using arrays11m 4s
-
(Locked)
Using Stretch and Lengthen6m 28s
-
(Locked)
Using Trim and Extend6m 25s
-
(Locked)
Using Break and Join5m 17s
-
(Locked)
Using grips and grip editing8m 5s
-
(Locked)
Using Boundaries5m 37s
-
(Locked)
Using Selection Cycling3m 36s
-
(Locked)
Using Fillet and Chamfer6m 37s
-
(Locked)
Using Divide and Measure6m 39s
-
(Locked)
Editing polylines and splines5m 48s
-
-
-
-
-
-
-
-