From the course: AutoCAD 2022 Essential Training
Unlock the full course today
Join today to access over 22,400 courses taught by industry experts or purchase this course individually.
Using Stretch and Lengthen - AutoCAD Tutorial
From the course: AutoCAD 2022 Essential Training
Using Stretch and Lengthen
- [Tutor] Once again, we're staying in our modifying objects, .dwg file and you can see I've done a double-click on the wheel to zoom to the visible extents of the drawing as well. We're going to take a look at the stretch and lengthen commands available in autoCAD mil. And what I'd like you to do is go to the modify panel on the home tab on the ribbon, click on the flyer and just pin open the modify panel. The reason being is that lengthen is here on the flyer out part of the panel and it just saves it, keep going back into the ribbon. Once you've done that we're going to zoom in on our little hot desking area where we placed our little array and also our little partition walls. So just zoom in close by rolling up on the wheel and then pan in upwards a little bit. I'm going to get in really nice and tight so that you can see what's going on. Now, I'm going to use stretch and lengthen to improve what we've got going on…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Selecting objects7m 43s
-
Using Offset and Mirror6m 58s
-
Using Move and Copy6m 14s
-
Using Rotate and Scale6m 42s
-
Creating and using arrays11m 4s
-
Using Stretch and Lengthen6m 28s
-
Using Trim and Extend6m 25s
-
Using Break and Join5m 17s
-
Using grips and grip editing8m 5s
-
Using Boundaries5m 37s
-
Using Selection Cycling3m 36s
-
Using Fillet and Chamfer6m 37s
-
Using Divide and Measure6m 39s
-
Editing polylines and splines5m 48s
-
-
-
-
-
-
-
-