From the course: Blender and Substance Painter: Architectural Visualization

Finishing the office frames

From the course: Blender and Substance Painter: Architectural Visualization

Start my 1-month free trial

Finishing the office frames

“

- [Instructor] To begin duplicating this for the other openings, I think I'll turn the floor back on. So we have that there and I'll turn the floor plan back on as well just so we can see how the drawing looks. Sometimes they have an indication as to where these vertical bars should go. So let's try that. I'll go to the top view and let's go to wireframe. And well, they don't really have the indications here but they do have it for the door and that's good. That helps, at least that tells us what side of the office the door should be on. So let's go ahead and press Shift + D and duplicate this and bring it over here. We can turn this by pressing the R key and then holding Control down and it snaps every 10 degrees, so that can help us just turn that in the correct direction. And then let's place this where the door should be. It looks like we've got this right here, along this edge right there. And then let's Tab into edit mode, hit the one key for Vertex select and let's just grab these here, and I'm going to bring this back till we line this up right here at that edge right there. And then let's try and put this in the center here, but let's just move this until we get it right about there, that looks pretty good. Let's go back to a solid view. Tab back into edit mode and yeah, I think we're looking pretty good there, okay. Let's now grab this and move it over. I'll press Shift + D and X but if I recall, we're going to need to spin this around, so let's go back to that top view and wireframe and yeah, the door's over here now. So what I'll do is go ahead and just spin it around. We can press R180 to spin it around 180 degrees, and we'll move it to this point right here. And it looks like we need to bring it in some, so let's Tab into edit mode and grab this part right here. Bring it into this edge and then we'll move this a little bit to get it centered right in there. There we go. All right. Let's see how we're doing here. Yeah, okay. Let's take this and work on these over here, these office openings over here. So looks like we've got one with the door and the same place over here. So let's do that Shift + DY and let's bring it over here. Once again let's keep that door in the same place or with the same width. So we don't want to move this one here, but we do want to move this down here. Let's move this to this edge right there. And therefore we could probably move this up just a bit right into here. Let's try that. Okay. Now we need to do the same thing here but we need to spin it. So let's go ahead and press Shift + DY and put that there and then let's press RZ180 to spin that around. And let's go back to the top view and put it in place. So this one could go right about here, right on that edge right there. And it looks like we've got a ways to go here. Oh, let me select that again and Tab into edit mode. Now let's grab this and move this over here and take this one and move it about right there, okay. Yeah, I think that'll work, there we go. So now in this hallway over here, we could grab these, I think, and let's move these over. Yeah, looks like we could just take these and duplicate them and move them in the Y and move them right down here. Something like this. It looks like this wall's a little bit thicker than the frames we have here. So let's press S and Y and just scale these out just a bit, cheat it just a bit there. And then for these over here, let's grab one right here. Let's do that. And let's press Shift + D and I'll just move this over here and let's turn it this way. This is the door I believe. So let's press R and hold Control and turn it this way 90 degrees, there we go. And move this up here like this, and then let's Tab into edit mode and grab this, looks like we don't have to move it too far, about like that. Maybe move this over just a smidge, there we go. Now let's try it again, Shift+ DX, bring this over here. Once again these walls are a little bit different, but that's okay. We'll go ahead and put them where we think they should go, like that. And then Shift + DX, let's move this over here. Anything else that we need to... Oh yeah, over here, let's do these two over here. We can grab this frame and let's press Shift + D and X and move this out and let's see which side the door is on. Let's go to that top view with the seven key and look at wireframes. So we've got a door here and a door here, all right? So what we can do is press R + Control and turn it 90 degrees this way, that is G and move this up into here. And let's line it up with this edge right there. And we just need to do a bit of work to bring this in. Here, and let's center this one up, something like this. Okay. Now let's do this one here. However, for this one, the doors on the other side. So let's just grab this again, Shift + DX and let's turn it 90 degrees in the Z, RZ, and then I'll hold that Control key down again and move it this way. And you can see in the upper left-hand corner the degrees that I'm turning is, let's move it 90 there. Now let's move this into place, wireframe, and let's get this right here. And then I want to, well, extend this over here. Let's do that. Extend this this way and center this up a little like that. And there we go. Okay, so now we've got all of our office openings in. From here what we're going to need to do is work on the doors. We've got doors over here and here, and we need a door here. I think what we can do is just use a frame out of one of these since this is basically a standard door width, we can use our frame here. So let's work on that in the next video.

Contents