From the course: Additive Manufacturing: Troubleshoot 3D Prints
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Nozzle replacement issues
From the course: Additive Manufacturing: Troubleshoot 3D Prints
Nozzle replacement issues
- [Female Instructor] There are several reasons why you might want to swap out your 3D printer's nozzle, abrasive materials may start to change the way film is laid down, impacting print quality. Some nozzles are so cheap that you can treat them as disposable, so you won't care if they abrade. It also might seem attractive to change your nozzle diameter. For example, you might want to use a large nozzle to speed up a large print, and use a smaller diameter for prints with fine features. Another reason it may seem attractive to use a disposable nozzle is it helps you avoid cleaning out clogs, you just throw the clogged nozzle away and replace it. There are however ways to clear clogs which we discuss elsewhere in this course. - [Male Instructor] Removing and reinstalling nozzles, either for cleaning purposes or to switch to a different one, can cause problems for your printer. The most important one is that it's…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Overview: Issues caused by printer hardware2m 51s
-
(Locked)
Parts of a 3D printer3m 29s
-
(Locked)
3D prints not sticking: Geometry and nozzle height5m
-
(Locked)
3D prints not sticking: Surface and materials compatibility4m 49s
-
(Locked)
3D prints not sticking: Temperature effects2m 22s
-
(Locked)
Printer over- or under-extruding4m 34s
-
(Locked)
Pimples, dimples, and stringing5m 52s
-
(Locked)
Test parts, printing square, and backlash3m 43s
-
(Locked)
Part dimensions incorrect4m 25s
-
(Locked)
Printer geometry-related problems4m 22s
-
(Locked)
Filament jams and heat creep4m 37s
-
Clearing a nozzle clog without disassembly4m 57s
-
(Locked)
Nozzle replacement issues3m 1s
-
-
-
-
-
-