From the course: Rhino 6: Tips, Tricks, and Techniques
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
ToasterBot 02: Building the enclosure - Rhino Tutorial
From the course: Rhino 6: Tips, Tricks, and Techniques
ToasterBot 02: Building the enclosure
- [Narrator] All right. Let's begin building our sad, but lovable, ToasterBot. The first step is to tackle the overall enclosure or form. I'm going to zoom in here just a bit and we'll take a closer look. So some tips in making this really clean form that will help you get more accuracy and better capture your design. So one of the things I like to do is use axis lines. You'll see these red guys. Those are just just basic straight lines I put in there. I put them on their own layer so I could lock it and then not accidentally move it. That will definitely help any of these operations I'm about to show you. Let's go ahead and turn off the final layer and you might be surprised, there's not very many curves here. We have the axis line I talked about. That's critical. This form on the bottom is going to function as our rail to flow along. And this curve here from the axis to one side is the profile. Let's go ahead…
Contents
-
-
What are degrees and why should I care?5m 17s
-
(Locked)
Edit > ReBuild with curves6m 41s
-
(Locked)
Edit > ReBuild with surfaces5m 13s
-
(Locked)
Edit > ReBuild command alternatives6m 15s
-
(Locked)
Quiz demo: Curvy cross1m 31s
-
(Locked)
Quiz demo: Symmetrical soap8m 19s
-
(Locked)
Quiz demo: Triple pod thing12m 16s
-
(Locked)
ToasterBot 01: Introduction and overview2m 56s
-
(Locked)
ToasterBot 02: Building the enclosure8m 2s
-
(Locked)
ToasterBot 03: Creating simple openings8m 23s
-
(Locked)
ToasterBot 04: Creating recessed openings7m 3s
-
(Locked)
ToasterBot 05: Cooking up bread6m 58s
-
(Locked)
ToasterBot 06: Building a lever8m 5s
-
(Locked)
ToasterBot 07: Making a retro knob8m 12s
-
(Locked)
ToasterBot 08: Modelling eyes7m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align the viewport camera4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align your camera viewport at any angle4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Creating coiled tubing for your science lab7m 1s
-
(Locked)
Make a 3D spiral ramp7m 32s
-
(Locked)
Dont forget to make reminders7m 34s
-
(Locked)
Save time with curve Booleans4m 8s
-