From the course: Rhino 6: Tips, Tricks, and Techniques
Unlock this course with a free trial
Join today to access over 22,600 courses taught by industry experts.
ToasterBot 03: Creating simple openings - Rhino Tutorial
From the course: Rhino 6: Tips, Tricks, and Techniques
ToasterBot 03: Creating simple openings
- [Narrator] Now that our overall form is built, we should make some openings. I'll be working on the side and top view first. We're going to use a simple and easy technique that you will love. We have the final form here already turned on, so let's zoom in, and make a few observations. Notice how this opening is following the overall form shape. It may not be readily apparent until you get really really close. So, you can now see how the underside flows along with the top, maintaining a uniform depth, or simulating thickness. So a few strategies to discuss, we're going to be implementing here. Always build your overall form first, then we'll come back in and make openings. We'll be taking curves that we create and projecting them so that they hit the surface. Then we can use them for splitting. This creates openings which we will then simulate the thickness. So this means there is no inside wall. And just to verify…
Contents
-
-
What are degrees and why should I care?5m 17s
-
(Locked)
Edit > ReBuild with curves6m 41s
-
(Locked)
Edit > ReBuild with surfaces5m 13s
-
(Locked)
Edit > ReBuild command alternatives6m 15s
-
(Locked)
Quiz demo: Curvy cross1m 31s
-
(Locked)
Quiz demo: Symmetrical soap8m 19s
-
(Locked)
Quiz demo: Triple pod thing12m 16s
-
(Locked)
ToasterBot 01: Introduction and overview2m 56s
-
(Locked)
ToasterBot 02: Building the enclosure8m 2s
-
(Locked)
ToasterBot 03: Creating simple openings8m 23s
-
(Locked)
ToasterBot 04: Creating recessed openings7m 3s
-
(Locked)
ToasterBot 05: Cooking up bread6m 58s
-
(Locked)
ToasterBot 06: Building a lever8m 5s
-
(Locked)
ToasterBot 07: Making a retro knob8m 12s
-
(Locked)
ToasterBot 08: Modelling eyes7m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align the viewport camera4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Working with imported meshes6m 1s
-
(Locked)
Make an isometric or exploded view5m 16s
-
(Locked)
Align your camera viewport at any angle4m 8s
-
(Locked)
Viewport shading controls3m 57s
-
(Locked)
Exploring design options with Record History4m 24s
-
(Locked)
Make better presentations with compositing5m 1s
-
(Locked)
Creating coiled tubing for your science lab7m 1s
-
(Locked)
Make a 3D spiral ramp7m 32s
-
(Locked)
Dont forget to make reminders7m 34s
-
(Locked)
Save time with curve Booleans4m 8s
-