From the course: Fusion 360: 3D Printed Product Enclosure
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
3D print and check fit - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
3D print and check fit
- [Narrator] Before moving on, it's a good idea at this point to test how well our components fit within our enclosure base. So I sent this to the printer and then brought in our battery charger to see how well it fit. Now the holes lined up perfectly, but I did want a little more friction there between the standoffs. Likewise, our slide switch slid a little too easily through that housing. So let's go ahead and address this back in Fusion.
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.
Contents
-
-
-
-
-
Housing for the slide switch7m 48s
-
(Locked)
Model circuit playground platforms7m 24s
-
(Locked)
Modify and mirror platforms5m 41s
-
(Locked)
Secure the battery3m 9s
-
(Locked)
3D print and check fit26s
-
(Locked)
Modify standoffs3m 45s
-
(Locked)
Modify the slide switch and housing2m 30s
-
(Locked)
Modify battery constraints7m 6s
-
(Locked)
Modify battery constraints, continued5m 52s
-
(Locked)
3D print and check new fit16s
-
-
-