From the course: Fusion 360 Product Design: Lighting
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding the cable loop slots - Fusion 360 Tutorial
From the course: Fusion 360 Product Design: Lighting
Adding the cable loop slots
- [Instructor] Okay, so the next thing we need to do in here is just add in a couple little square slots on this web to open it up. There's a little plug that is on the end of this cable and that needs to thread through here and then back and then back in again so it can create a little slack loop in here to help keep this plugged in at all times. And then if you pull on the LED strip when you're threading it through here accidentally or, you know if things move down the track, this little thing will act a little bit like a buckle and just help that cable stay put. And if there is a little bit of movement, it'll probably help keep it on the other side of this little pair of slots that we're putting in here. So the first thing we're going to do is come in and select the YZ plane in the Origin folder and say Create a Sketch. And we're going to use the Project Tool to sort of collect up some geometry that we can use as a reference, and say Project. And we could probably pick this…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Adding 2mm material around slice zones6m 9s
-
(Locked)
Adding sweep 2mm material around slice zones9m 27s
-
(Locked)
Adding strengthening material7m 41s
-
Adding a middle web2m 10s
-
(Locked)
Adding web to body7m 4s
-
(Locked)
Adding the cable loop slots3m 44s
-
(Locked)
Adding fillets to finish and slice3m 17s
-
(Locked)
-
-
-
-
-
-
-
-
-
-