From the course: Fusion 360 Product Design: Lighting
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding strengthening material - Fusion 360 Tutorial
From the course: Fusion 360 Product Design: Lighting
Adding strengthening material
- [Instructor] Alright, so now I've completed adding the extra material to the other slice zones in here. You can see that I've kind of gone in and added some extra slice zone sketches and I've renamed some of these planes as well to what's going on with them, so slice zone one and there's where we're offsetting five mil down or 10 mil up, things like that. So, these have been added in. I've sort of renamed these and kept it in line with what I've called the sketches as well. So, the next thing we need to do is to sort of come in and add a little bit more extra material to these as well. So, if we were to slice this off through this slice zone plane here, if we look at slice zone four, if we were to chop this into two pieces now, these pieces would just be hanging out on their own and they're a little bit flexible. So, I wanted to add some more material in here that goes between them as well. So, I'm just going to do that and then we're going to add another thingy down here as well…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
-
(Locked)
Adding 2mm material around slice zones6m 9s
-
(Locked)
Adding sweep 2mm material around slice zones9m 27s
-
(Locked)
Adding strengthening material7m 41s
-
Adding a middle web2m 10s
-
(Locked)
Adding web to body7m 4s
-
(Locked)
Adding the cable loop slots3m 44s
-
(Locked)
Adding fillets to finish and slice3m 17s
-
(Locked)
-
-
-
-
-
-
-
-
-
-