From the course: Fusion 360 Product Design: Lighting
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding the tail end lugs - Fusion 360 Tutorial
From the course: Fusion 360 Product Design: Lighting
Adding the tail end lugs
- Okay, jump back out of the shell parts here, and probably go back up into base shell parts cause I had that isolated and un-isolate that. And then go back up here and start working on the tail section up this end, and then we'll come back down cause there's a fair bit we need to do on the head end and on the fins. We'll probably spend a bit more time down there and then we're almost near the end, so. The next part we're going to work on is the tail section up here, so if I come back up out of here and grab the tail end shell I'm going to activate this one, and we can actually isolate it as well. Make those turned on. Then we can come in and probably turn the tail lugs off, we don't need to see those. Alright, but one of the things we want to do is probably slice the window off, we'll do that quickly while we're in here. So we'll turn our side splitter sketch on, and then say split, and we'll split this body. I'm going to use this splitting tool and it'll take a little window off the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.