From the course: Fusion 360: 3D Printed Product Enclosure
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Align and position components - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Align and position components
- [Instructor] Let's now position the rest of our components into their proper locations. We'll begin with our battery. And if I bring that in, you'll see that the battery is actually splitting our base feature here, and the reason for that was because when we made this circle, we actually extruded it up. We could have extruded it down, and the battery would have lay perfectly on the top. So let's go ahead and move the battery now so it actually lies on the surface. And we're again going to approach it by keeping it simple and just using the Align tool. So we'll go to Modify, Align. And to make sure I get the bottom of that battery, I'm going to untoggle the body of that cylinder, for now. And again, I just want it to go straight up, so I'm not going to reference any of these points. I'm just going to click on the surface, and I'll bring back the body, click on that surface, click OK, and now the battery went straight up. But as we can see, it's cutting our battery charger, so we need…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Insert parts into current design3m 30s
-
(Locked)
Modifying a linked component5m 15s
-
(Locked)
Review of the layout3m 11s
-
(Locked)
Move and align the charger into position4m 30s
-
(Locked)
Model standoffs for the charger7m 58s
-
(Locked)
Model standoffs, continued4m 48s
-
(Locked)
Align and position components6m 22s
-
-
-
-