Creating the tail drain - Fusion 360 Tutorial

Contents

• Introduction Introduction

  • Welcome

    43s
  • Exercise files

    1m 5s
• 1. Sculpting the Form of the Model 1. Sculpting the Form of the Model

  • Sculpting the outer form

    7m 12s
  • Sculpting the inner form

    5m 41s
  • Creating new facets

    12m 24s
  • Sculpting the tail

    3m 53s
  • Adding the control module

    3m 21s
  • Creating inner form curves and frames

    7m 11s
• 2. Creating the Lug Support Sketches and Pattern 2. Creating the Lug Support Sketches and Pattern

  • Creating the lug loop sketch

    15m 4s
  • Creating fillets

    48s
  • Adding an extrusion

    11m 6s
  • Adding the extrusion bridge

    3m 32s
  • Joining the frames with a tangent spline

    7m 42s
• 3. Creating Frame Ring Connector Rails 3. Creating Frame Ring Connector Rails

  • Using 3-point planes to create the frame

    4m 4s
  • Cleaning up the frame rings

    1m 32s
  • Creating the center line sketch

    2m 38s
  • Creating the flat tail rails

    5m 35s
  • Creating curved rails

    3m 42s
  • Central spine

    1m 13s
• 4. Form 2: Build Volume and Copy 4. Form 2: Build Volume and Copy

  • Form 2: Build volume

    4m 15s
  • Sketching lines to help divide the model

    3m 11s
• 5. Creating Additional Material around Slice Zones 5. Creating Additional Material around Slice Zones

  • Adding 2mm material around slice zones

    6m 9s
  • Adding sweep 2mm material around slice zones

    9m 27s
  • Adding strengthening material

    7m 41s
  • Adding a middle web

    2m 10s
  • Adding web to body

    7m 4s
  • Adding the cable loop slots

    3m 44s
  • Adding fillets to finish and slice

    3m 17s
• 6. Creating Interfaces at the Connecting Zones 6. Creating Interfaces at the Connecting Zones

  • Adding the frame connectors

    6m 54s
  • Adding parts to an assembly

    1m 25s
• 7. Adding Shell for Outer Skin Sketch: Tail Split Surf and Split Tail 7. Adding Shell for Outer Skin Sketch: Tail Split Surf and Split Tail

  • Outer volume layout

    2m 24s
  • Creating the tail surf split

    5m 30s
  • Creating the tail support sketch

    8m 56s
  • Adding upper support pins

    4m 36s
  • Adding lower support pins

    5m 20s
  • Adding side support pins

    1m 56s
• 8. Dividing the Model into Parts 8. Dividing the Model into Parts

  • External parts assembly

    7m 4s
  • Separating the model into parts

    1m 58s
  • Organizing the main body parts

    1m 22s
• 9. Creating the Support Lugs 9. Creating the Support Lugs

  • Creating the tail lugs

    7m 51s
  • Creating the eye lugs

    6m 1s
  • Sketch lug profile

    9m 10s
• 10. Support Base 10. Support Base

  • Creating the power exit

    2m 45s
  • Creating the support base

    4m 50s
  • Support base sketch

    4m 32s
  • Creating base feet

    3m 52s
  • Adding base webs

    3m 6s
  • Adding base fillets

    4m 38s
• 11. Tail End Details 11. Tail End Details

  • Adding the tail end lugs

    4m 12s
  • Connecting the tail end lugs

    2m 51s
  • Creating tail pins

    3m 21s
  • Creating tail pin hallow

    5m 23s
  • Creating the tail drain

    3m 33s
  • Creating the tail socket

    6m 58s
  • Finishing off the tail

    3m 42s
• 12. Splitting the Model 12. Splitting the Model

  • Creating the head split

    2m 25s
  • Creating the fin split

    3m 39s
  • Validating the print form with PreForm

    5m 48s
  • Creating the final body splits

    4m 15s
• 13. Window Panels 13. Window Panels

  • Using spline to create windows

    9m 14s
  • Creating window cuts

    5m 57s
  • Changing part materials

    2m 11s
  • Finishing the frame

    14m 26s
• 14. Internal Support Structure 14. Internal Support Structure

  • Setting the mass properties

    5m 52s
  • Building support parts

    5m 59s
  • Fin geometry

    6m 37s
  • Creating fin lugs

    4m 43s
  • Completing fin lugs

    5m 6s
  • FrameCreate tail pin hallow print

    8m 5s
• Conclusion Conclusion

  • Next steps

    14s