From the course: Fusion 360 Product Design: Lighting

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Creating tail pins

Creating tail pins - Fusion 360 Tutorial

From the course: Fusion 360 Product Design: Lighting

Start my 1-month free trial

Creating tail pins

“

- [Instructor] Okay, so the next thing we're going to do is just come in here and use what we've created in this part to help add a new pin to the tail section. So I'm just going to turn the tail section on. Even though I've still got this one activated, and we want the tail left hand side because the other one is mirrored, and we'll switch that on. And what we want to do, I'm just going to come in here and put an axis through the cylinder. And probably just pick this one, and then we can just grab on the end of it and just stretch it a little bit. We can grab the end of it in there and pull that out. If we have a bit of a look at our model from the left, we can see that the angle that we choose, is pretty good, like the twenty degrees. I was just thinking whether or not we should maybe poke it down a little bit, but I think it's in line with where we want to go. Alright, and that being said, it's probably time to switch over and activate the tail, and then we're going to create a…

Contents