From the course: Fusion 360 Product Design: Lighting

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Creating the tail socket

Creating the tail socket - Fusion 360 Tutorial

From the course: Fusion 360 Product Design: Lighting

Start my 1-month free trial

Creating the tail socket

“

- [Narrator] Okay, so the next thing we need to do is sort of round off the inside of our little cylinder here to help match the pin. We're going to create a bridge across these two to add a bit more strength in there. So the first thing we need to do is probably turn our analysis off. Come in here, turn that one off, leave it on in the main one, so if we create a new one, it'll work straight away. And I'm going to grab this part and in the browser tree here, it'll highlight all the way down the line where that cell is and I can use it as a guide to say, "Yeah, that's the one that we want to activate." I'm going to go a bit further down into the top shell and activate that one, because that's the part that we need to be working on next. And if we turn the tail off temporarily, we are finished with that at the moment. We need to create a filet back here across these two edges, so I want to use the Control key in there and we don't want 7.5, that's quite big. We want to make it three…

Contents