From the course: Fusion 360: 3D Printed Product Enclosure

Unlock the full course today

Join today to access over 22,400 courses taught by industry experts or purchase this course individually.

Cutouts for LEDs and ports

Cutouts for LEDs and ports - Fusion 360 Tutorial

From the course: Fusion 360: 3D Printed Product Enclosure

Start my 1-month free trial

Cutouts for LEDs and ports

[Narrator] Now that we've modeled the top portion of our enclosure and shelled it we'll need to make some cutouts here so that certain elements from our circuit playground board can be able to poke through. So let's bring in all our components so we can see everything and we'll get rid of top and just show the bottom for now. The first thing I want to do actually is, I need to rotate this circuit playground because I want this battery plug to be on this side and the USB plug to be on the opposite side. So I'm going to right click on our circuit playground here above our or right below our browser. Go to move and let's go to a top view. I'm going to rotate this and just enter 180 degrees there. And click okay and that'll go ahead and rotate it. Now I want to create a sketch on the top portion of the enclosure, so I'll go to create sketch, select that top portion, we'll click capture position, and we'll remove the top now so you can actually see the components under it and we'll hit C…

Contents