From the course: Learning Fusion 360 CAM
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Cutting 2D contours - Fusion 360 Tutorial
From the course: Learning Fusion 360 CAM
Cutting 2D contours
- [Instructor] We're now ready to create our next operation. And that operation is going to be a 2D contour. Remember in our last movie in the simulation, we found that after our cut of the pocket, there were this small fillet here left where the cutter didn't actually reach. So we're going to run a 2D contour path around this, just to clean out that material, and make sure we get it all in this operation. To do that, we're going to go the 2D dropdown. This time, we're going to select 2D contour. Now, you'll notice, the setup dialogue looks just like the previous one, and that's super important, really want you to get hang of the setting up of operation is going to become repetitive. You're going to need to look at the similar things across the spectrum, but reality is, only certain things are going to change on each of these tabs depending on the operation. So, first and foremost, we'll look at the tool, and it…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.