From the course: Fusion 360: 3D Printed Product Enclosure
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Design the cover and shell - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Design the cover and shell
- [Instructor] We'll begin our cover design by creating an offset plane on top of our Circuit Playground board, and then creating a sketch on that plane. To do so, we'll go to construct, down to offset plane, and we'll select the top of our Circuit Playground. We're going to offset this by three millimeters. So we'll just enter three, and we'll see our plane will move up three millimeters, and we'll click okay. Next, we'll go to sketch, create sketch, select that offset plane, so careful here that you select the right plane, and we'll begin sketching on that plane. We'll start with a sensor diameter circle, so we'll click c for circle, start at the origin. We're going to come out and reference the edge of our bottom portion of our case here. So let's go to a top view. We're going to snap right to that edge. You should see that diameter, which will be the same as 60.6 millimeters. And now we can click stop sketch. I'm going to bring that sketch back in view so I can see it. And I'm…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.