From the course: Fusion 360: Design for Mechatronics
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Designing Link4 - Fusion 360 Tutorial
From the course: Fusion 360: Design for Mechatronics
Designing Link4
- [Instructor] To start my link four, I will create a new sketch on the front plane, and I'll just sketch out the general shape here, start with a line, draw something like this, this, an arc, and just the general shape. Something like this to get started with. And then of course, I'll finish it off with some constraints and dimensions. So first I want this to be a fairly symmetrical sketch. So there's a number of ways I can do this. I'm just going to use the Equal Constraint and say I want these two lines to be equal, and also these two lines to be equal. Then I'll throw in some dimensions. Maybe I'd like the distance from here to here to be say, 70 millimeters. The radius, let's say is about 30 millimeters, and angles between this line and my angled line, let's say maybe 170 degrees. And finally, the length from bottom corner to let's say the circle is going to be 120 millimeters, let's say. And now I have a…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
Designing the base component4m 1s
-
(Locked)
Adding holes and fillets3m 12s
-
(Locked)
Designing Link13m 37s
-
(Locked)
Adding holes to Link13m 25s
-
(Locked)
Extrude with Draft: Designing Link24m 55s
-
(Locked)
Designing Link35m 46s
-
(Locked)
Designing Link47m 19s
-
(Locked)
Designing Link53m 22s
-
(Locked)
Designing Link64m 15s
-
-
-
-
-