From the course: Fusion 360 Modeling Techniques and Workflow
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Lofting and stitching - Fusion 360 Tutorial
From the course: Fusion 360 Modeling Techniques and Workflow
Lofting and stitching
- [Instructor] Now that we've gone ahead and created the sketch geometry that we need to create our cutting tool, let's go ahead and create the surfaces of this cutting tool. We're going to use this circle up here and this lower circle that we've built. We're going to go ahead and use a loft tool to connect these two, now you'll notice that I'm in the surfacing environment, and let me go ahead and select loft. And I'm going to select that sketch and I'm going to select this sketch right here. Now I can't really see that body so let's go ahead and turn off that C2 there we go, I can see that, and click OK. Now you'll notice that when you create a body inside of the surfacing environment you are usually almost always creating just a surface, you're not creating a solid body. So it has no mass to it. Now we need to create also the bottom section of this tube and the way we're going to go ahead and do that is let's turn off this…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.