From the course: Fusion 360: 3D Printed Product Enclosure
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Model standoffs for the charger - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Model standoffs for the charger
- [Instructor] Now that we've positioned our battery charger, we're going to create a sketch on this surface and project in these holes so that we can begin creating our standoffs. We'll go to Create Sketch, and we're going to choose that surface of our extruded circle here. And it's going to ask you if you want to capture the position. We're going to say yes. We'll click Capture Position since some of our components were moved. And then we're going to, well, we can go two ways. So if we go to Sketch, we can go down to Project Include, and then choose Project, or notice the shortcut P. So I'm just going to hit P on my keyboard, and then I can go in and select each individual circle here. So make sure your Selection Filter is to the Specified entities and not the Bodies. So we're going to click on each of these circles, and then click OK. And now, if we remove the Battery Charger, we see that we're left with our circles there. We'll untoggle Bodies. And as you can see, I have a slight…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
Insert parts into current design3m 30s
-
(Locked)
Modifying a linked component5m 15s
-
(Locked)
Review of the layout3m 11s
-
(Locked)
Move and align the charger into position4m 30s
-
(Locked)
Model standoffs for the charger7m 58s
-
(Locked)
Model standoffs, continued4m 48s
-
(Locked)
Align and position components6m 22s
-
-
-
-