From the course: Fusion 360: 3D Printed Product Enclosure
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Model standoffs, continued - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Model standoffs, continued
- Well continue with the standoffs by extruding a smaller diameter cylinder on top of these existing cylinders. To do that we'll go to create sketch and we'll start sketching on top of this cylinder here. So we'll click on that and we're going to bring it that previous sketch so we can reference it. So we'll click on sketches here, make sure to expand it. And then click on sketch two, I also find it distracting that this keeps lighting up. So I'm going to remove bodies so we're just looking at the sketches now. And I'm going to project this dashed circle here. So we're going to hit P for project, select it and click okay, next I'm going to just simply draw three other circles here based off of these center points. So I'm going to hit C for circle, it doesn't matter what the diameter is right now. We'll just quickly do it by drawing three circles. And now I don't need to see sketch two anymore so I'm going to untoggle it and I'm going to look at this circle here and I'm going to offset…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.