From the course: Fusion 360: 3D Printed Product Enclosure
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Modify the slide switch and housing - Fusion 360 Tutorial
From the course: Fusion 360: 3D Printed Product Enclosure
Modify the slide switch and housing
- [Instructor] Next we'll do a similar thing with our slide switch to give it more of a friction fit in there so that it doesn't so easily slide in and out. To do that, we'll first untoggle our slide switch component, and the way we're going to modify this is to go ahead and just select the surface that we want to change. And notice in our timeline how we'll get these little three hash lines to show us which feature that is. Now remember that we did this side and this side together, so if I deselect and then select this side of that wall, it'll give me the exact same feature. So let's double-click on that feature to select it, and all we're going to do here is change that distance from negative 0.2 to negative 0.1, and you'll notice it'll bring those walls in a little bit, just 0.1 millimeters. And then we're going to click OK. And we'll do the same thing with our top. So if I select that surface, it's actually, it'll show me right on the timeline that it was just the next feature…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Housing for the slide switch7m 48s
-
(Locked)
Model circuit playground platforms7m 24s
-
(Locked)
Modify and mirror platforms5m 41s
-
(Locked)
Secure the battery3m 9s
-
(Locked)
3D print and check fit26s
-
(Locked)
Modify standoffs3m 45s
-
(Locked)
Modify the slide switch and housing2m 30s
-
(Locked)
Modify battery constraints7m 6s
-
(Locked)
Modify battery constraints, continued5m 52s
-
(Locked)
3D print and check new fit16s
-
-
-