From the course: Fusion 360: CNC Topographic Site Models

Unlock the full course today

Join today to access over 22,500 courses taught by industry experts or purchase this course individually.

Raising topographic layers

Raising topographic layers - Fusion 360 Tutorial

From the course: Fusion 360: CNC Topographic Site Models

Start my 1-month free trial

Raising topographic layers

- [Instructor] So we've just finished up splitting up our larger site model into individual topographic pieces, but if we go over to our bodies, you'll see that we have just one body with 27 pieces, and the 27 pieces are our individual sheets right here. As of now, we can't move one sheet without moving the entire site, and what we really need to do is raise these up to their appropriate height relative to their topography line. To do that, we have to unstitch this body. So I'm going to go over to Unstitch right here, and it's asking me for a face or body, and I'm going to select this guy. And hit OK. All right. So what we've done is turned that one body into all of these individual pieces. I'm going to close this down for now. And the next thing that we're going to do is raise up each sheet to its topography line. To do that, I'm going to select my first sheet, right-click and go to Move or Copy. And instead of…

Contents