From the course: Autodesk Fusion 360: Designing for Wood
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Reusing components - Fusion 360 Tutorial
From the course: Autodesk Fusion 360: Designing for Wood
Reusing components
- [Male Narrator] I mentioned, previously, that a sketch can be reused in any of Fusion 360's components. What I didn't mention is that a sketch can be reused for other purposes as well. If I turn on the sketch that was used to create the pattern of slots in the side component, I can use it for patterning components in general. What I'd like to do is create a pattern, a pattern on path, of components. I'll select the wedge and the slat, and then select that original sketch for the path, remembering that I had originally gone 51 inches with seven instances that used the path direction for the orientation. A very complex set of patterning was done very quickly. I'll turn the sketch off, go to the Create menu again, and go to the Mirror tool, tell it that I would like to mirror components, select the wedges either from the browser or directly from the screen, and then select the side. For the mirror plane, I need to look for the slat component in the browser, expand the origin, entities,…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.