From the course: GoPro HERO5 and HERO6: Tips, Tricks, and Techniques
Unlock the full course today
Join today to access over 22,400 courses taught by industry experts or purchase this course individually.
Powering up a GoPro Hero5/6 camera - HERO Tutorial
From the course: GoPro HERO5 and HERO6: Tips, Tricks, and Techniques
Powering up a GoPro Hero5/6 camera
- We'll explore power options in much greater depth later on in this course. But, for now, let's talk about the basics of getting the GoPro camera to power on. If your GoPro camera has a removable battery, make sure you've put a battery in the charger and it's charged up. Remember, this is pretty simple, just open up the case, flip down the door and remove the camera. And, then, press the button. And slide the door open. You'll see the battery inside and that just slips in and out. If you don't have an external charger, you can put the battery in and connect a USB cable into the side port. Again, we're going to walk you through all those settings a little bit later. But you need to make sure there's a battery in the camera or it won't turn on. Close the door, making sure to be very careful that it completely latches. If you have any difficulty closing that door, you'll want to check that the battery is properly seated and pressed all the way in. If you don't see a tight seal here with…
Contents
-
-
-
Choosing a GoPro camera that's right for you3m 48s
-
Unboxing a GoPro HERO5 Black9m 5s
-
Unboxing a GoPro HERO6 Black9m 39s
-
Unboxing a GoPro HERO5 Session7m 20s
-
Basic camera anatomy of the Hero5/6 Black camera4m 12s
-
Basic camera anatomy of the Hero5 Session camera4m 58s
-
Inserting a memory card into a GoPro Hero5/6 camera3m 41s
-
Powering up a GoPro Hero5/6 camera3m 49s
-
Choosing a shooting mode1m 59s
-
Recording with a GoPro camera1m 54s
-
-
-
-
-
-
-
-
-
-
-
-
-
-