From the course: InfraWorks: Drainage Design

Unlock the full course today

Join today to access over 22,600 courses taught by industry experts or purchase this course individually.

Adding a drainage network to the model

Adding a drainage network to the model - InfraWorks Tutorial

From the course: InfraWorks: Drainage Design

Start my 1-month free trial

Adding a drainage network to the model

“

- [Instructor] Once you've made sure that you're using the correct windfall content table, you can shut that window down, and now we can get on to the fun stuff. So as I told you before, we did have a couple of sort of little tips and tricks when we went through the watershed. And one of the things that we did find out was that sometimes analysis wouldn't work on roads that had been converted to design roads. So here we've got, let's see, that's a planning road. This is a design road. So if you just right-click and convert to a design road, and then I'll right-click again and go to drainage, you'll notice that I don't have an add drainage option. Now, that is because this was a converted road. So again, it's a little bit annoying, but at least now you know why your automatic drainage network design may not work. So what we're going to do is we're going to go to the roads button, and from the design roadways pencil, we're going to choose the local road. I'm just going to choose…

Contents