From the course: Learning Mastercam for SOLIDWORKS

Unlock the full course today

Join today to access over 22,400 courses taught by industry experts or purchase this course individually.

Touring the interface

Touring the interface

From the course: Learning Mastercam for SOLIDWORKS

Start my 1-month free trial

Touring the interface

- [Narrator] In this video, we're going to be touring the interface of SOLIDWORKS with the Mastercam plugin turned on. Now if you haven't already installed Mastercam, you probably have a CD-ROM or a flash drive. Go ahead and install the software. And then when you launch SOLIDWORKS for the first time after it's installed, you should have a brand new tab here at the top of your screen, so it should be called Mastercam 2019, or whatever version you might be working in. Now, if you're using an older version, that's okay because a lot of the functionality is pretty much the same. So, you've got this new tab up here. For some reason, if you do not see that tab, go over here to tools, add-ins, and down here at the bottom of the screen you should see all available add-ins. And make sure you have Mastercam 2019 turned on, and also make sure it's turned on for startup as well as for right now. Click on okay, and you should be all set. Now we are in SOLIDWORKS, so we're using all the basic…

Contents