From the course: Photogrammetry for Product Design and AEC
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Closing mesh holes in Metashape
From the course: Photogrammetry for Product Design and AEC
Closing mesh holes in Metashape
- [Instructor] This video, we'll take a look at the process for closing holes in a mesh in Metashape. I'm working in the exercise file, sample set Oh five mesh edit deleted dot psx and you can find that in the folder labeled sample set Oh five mesh edit. So I spent some time here, manually deleting a few chunks of noisy mesh faces. So, which are mostly in these areas here. I also did a little bit of work on this hole underneath the head of this figure. And this will be a little bit easier to see, if we switch our model view to model solid. And that way we don't look at the texture image, we just look at the faces themselves. So you can see we've got a big hole here, big hole here and obviously big hole on the bottom. And so, this process of hole filling is important for a lot of different workflows. For example, 3D printing requires a watertight mesh, so that means every face meets up with another face exactly at its edge,…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
- sample_set_00_calibration.zip
- sample_set_01_bird.zip
- sample_set_02_stillLife_part_1.zip
- sample_set_02_stillLife_part_2.zip
- sample_set_02_stillLife_part_3.zip
- sample_set_02_stillLife_part_4.zip
- sample_set_03_stillLife_video.zip
- sample_set_04_statue_part_1.zip
- sample_set_04_statue_part_2.zip
- sample_set_04_statue_part_3.zip
- sample_set_04_statue_part_4.zip
- sample_set_04_statue_part_5.zip
- sample_set_04_statue_part_6.zip
- sample_set_04_statue_part_7.zip
- sample_set_04_statue_part_8.zip
- sample_set_04_statue_part_9.zip
- sample_set_04_statue_part_10.zip
- sample_set_04_statue_part_11.zip
- sample_set_04_statue_part_12.zip
- sample_set_04_statue_part_13.zip
- sample_set_04_statue_part_14.zip
- sample_set_05_mesh_edit.zip
Contents
-
-
-
-
-
-
(Locked)
How to set mesh editing goals3m 14s
-
(Locked)
Importing a mesh into Metashape for editing1m 50s
-
(Locked)
Analyzing and repairing mesh topology in Metashape2m 50s
-
(Locked)
Automatically removing isolated mesh fragments in Metashape3m 15s
-
(Locked)
Manually selecting mesh faces in Metashape4m 53s
-
(Locked)
Closing mesh holes in Metashape3m 44s
-
(Locked)
Smoothing a mesh in Metashape2m 6s
-
(Locked)
Decimating a mesh in Metashape3m 21s
-
(Locked)
Exporting a photogrammetry model for 3D printing1m 51s
-
(Locked)
-