From the course: MicroStation 3D Essential Training
Unlock the full course today
Join today to access over 22,400 courses taught by industry experts or purchase this course individually.
2D and 3D printing - MicroStation Tutorial
From the course: MicroStation 3D Essential Training
2D and 3D printing
- [Instructor] So now that the drawing has been completed, 2D and 3D, we can go ahead and create our PDF file. So we'll start with our 2D version. And I'll go ahead and review the process to create that PSET, SET file, the print settings file, as well. Let's start by placing a fence from our magenta points. Just a reminder that the reason that we're doing it this way is so that our fence will wind up just off of the corner here. We don't want to snap right on the corner because it will end up splitting this line and then it will make the line weight for the border line too thin. So now we can go to Print and then we're already set up with the correct pdf.plfcfg file. So let's go ahead and hit Fence, we'll take it off Rasterized and we'll go to monochrome. Rasterized is only used for 3D drawings. Then we'll use the ANSI B size, Maximize, and then set the Scale to one. So now that we've set up all of our settings, let's do a File, Save Print Definition File, we'll just keep this…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Drawing the base4m 53s
-
Drawing the array4m 36s
-
Adding the cut2m 26s
-
Drawing the auxiliary solid3m 38s
-
Drawing the slot and corners7m 10s
-
Creating the 2D views with title blocks6m 42s
-
Linear dimensions9m 46s
-
Angular and radial dimensioning6m 14s
-
Adding the finish mark3m
-
2D and 3D printing3m 20s
-
-
-