From the course: MicroStation 3D Essential Training
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Creating the 2D views with title blocks - MicroStation Tutorial
From the course: MicroStation 3D Essential Training
Creating the 2D views with title blocks
- [Instructor] Now that we've finished the 3D solid, we're ready to set up the two dimensional view. So I'm going to switch over to my B size border sheet view. We've already set up the title block from our last project. Now, what we're going to be doing is bringing in the two dimensional views and also the isometric view. I'm going to go to my reference tool and then we're going to attach our last project file. We're using 04_06 which is our current file and then we'll do our front view first. We'll use that as our base view. I'm just going to place this just about here. Just a rough location to give us enough room for our dimensioning. We can always move the view later. And then I'll use my copy fold reference and we're going to not references the right view. That's really not a necessary view. Instead we'll just reference our top view. We'll reference about horizontal line, third angle projection. Now we'll come up here. I'm going to place a view fairly close to the notes here…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Drawing the base4m 53s
-
(Locked)
Drawing the array4m 36s
-
(Locked)
Adding the cut2m 26s
-
(Locked)
Drawing the auxiliary solid3m 38s
-
(Locked)
Drawing the slot and corners7m 10s
-
(Locked)
Creating the 2D views with title blocks6m 42s
-
(Locked)
Linear dimensions9m 46s
-
(Locked)
Angular and radial dimensioning6m 14s
-
(Locked)
Adding the finish mark3m
-
(Locked)
2D and 3D printing3m 20s
-
(Locked)
-
-