From the course: MicroStation 3D Essential Training
Unlock the full course today
Join today to access over 22,500 courses taught by industry experts or purchase this course individually.
Drawing the base - MicroStation Tutorial
From the course: MicroStation 3D Essential Training
Drawing the base
- [Instructor] This is the first video for the angle guide project, so we're going to start by drawing the base. I've already opened up the project to complete file, so let's go ahead and save this one more time, and then I'll do a Save As, and we're going to save this in our Next Chapter folder, so we're going to save this in Chapter Four, and I'm going to call this one Project #3, and then 04, and then underscore 01. Okay, so just like we did when we started Project #2, we started with the previous project and we're going to use this now, this Project #2 drawing as our setup for Project #3 so I can go ahead and safely delete the solid, so I'll just select the whole thing and hit delete. And then over here, in my B size border view, I can go ahead and delete the dimensioning. Let me just go through and delete all the dimensioning and the extra view that I had, and I'm going to leave the isometric view text off to the side here. And then I'll go ahead and detach these views and then…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Drawing the base4m 53s
-
Drawing the array4m 36s
-
Adding the cut2m 26s
-
Drawing the auxiliary solid3m 38s
-
Drawing the slot and corners7m 10s
-
Creating the 2D views with title blocks6m 42s
-
Linear dimensions9m 46s
-
Angular and radial dimensioning6m 14s
-
Adding the finish mark3m
-
2D and 3D printing3m 20s
-
-
-