From the course: Learning Onshape
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Building the wheel spacer (rectangle, revolve, and mulibody) - Onshape Tutorial
From the course: Learning Onshape
Building the wheel spacer (rectangle, revolve, and mulibody)
- [Speaker] The next thing I want to on my design is create a wheel spacer inside of this part. So the end goal here is to create a wheel spacer that's defined off of this wheel part already. So I already have one part which we call wheel number two and let's go ahead and create another part directly inside of it. So I can choose either the top plane or the front plane. I'm gonna choose the front plane, I'm gonna start a sketch. Now the only problem here is I'm looking at this and I can just kind of see that wheel, I'd really like to see inside of the part. So I want to switch over to something like a translucent view so I can kind of see in there and maybe snap to some of the other types of entities inside of there. So I'm gonna choose a very simple rectangle. I'm going to draw something on here, just draw it out, and notice it's a little bit big, it's okay. And I want to then relate some thing together. Right, so at this point here I'm going to say I would like this line right here…
Contents
-
-
-
-
-
(Locked)
Making the wheel8m 14s
-
(Locked)
Building the wheel spacer (rectangle, revolve, and mulibody)3m 58s
-
(Locked)
Importing parts (downloading files and 608 bearing)5m 25s
-
(Locked)
Building the base plate10m 2s
-
(Locked)
Designing the king pin6m 49s
-
(Locked)
Designing the hanger4m 34s
-
(Locked)
Making the bushings2m 4s
-
(Locked)
Creating the truck assembly5m 10s
-
(Locked)
Design the deck2m 28s
-
(Locked)
Putting it all together3m 3s
-
(Locked)
-
-