From the course: Learning Onshape
Unlock the full course today
Join today to access over 22,400 courses taught by industry experts or purchase this course individually.
Designing the king pin - Onshape Tutorial
From the course: Learning Onshape
Designing the king pin
- [Instructor] Now the next thing we need to do in this design is to create the king pin. And before we can create the king pin, we need to create a hole for where we're going to place it. So over here on this surface, I'd like to create a revolved cut to put a hole through this part so I can then build the king pin that will go through it. So I'm gonna choose this Right plane here, which goes directly through the part, you can see there, in the middle, and I'm gonna start a Sketch directly on that, and I'm gonna click on the Right plane so I'm looking directly at it, and then I'm gonna go over here and look at Sketch number one which is our original Sketch, and I'm gonna make sure we show that so we can kinda leverage some of that information. Now I'm gonna click on this line here and that line there and I'm gonna convert those over into this Sketch. So click on that one and I'm gonna say Use. There it is. And then, now that line and that line, I wanna make them both Construction…
Contents
-
-
-
-
-
Making the wheel8m 14s
-
Building the wheel spacer (rectangle, revolve, and mulibody)3m 58s
-
Importing parts (downloading files and 608 bearing)5m 25s
-
Building the base plate10m 2s
-
Designing the king pin6m 49s
-
Designing the hanger4m 34s
-
Making the bushings2m 4s
-
Creating the truck assembly5m 10s
-
Design the deck2m 28s
-
Putting it all together3m 3s
-
-
-