From the course: Learning Onshape
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
More sketch tools (spline, polygon, point, and text) - Onshape Tutorial
From the course: Learning Onshape
More sketch tools (spline, polygon, point, and text)
- [Narrator] In this video, we're going to be covering a few more of the sketch tools. Now, in the last video, you can see we covered the line. We covered the rectangle. We covered the circle tool. We also got into a little bit of the dimensioning and construction geometry. In this one, we're going to start off with the polygon tool and the arc tool. So the first on here's the arc tool, and there's three different ways to create arcs. So I have a 3 point, a tangent arc, and a center point arc. The 3 point arc, go ahead and choose that one. Notice we're on Sketch 1 on the Front plane, and I'm going to go ahead and just click on Front, so I spin it around, so I'm looking directly at that. Let me go and hide that plane so I don't see it. 3 Point arc, click once where you want to start. Click again where you want to end, and then you're going to choose what's that radius there that's going to create the arc. As soon as you've chose it, just click once, and you can see where it is. Of…
Contents
-
-
-
-
Creating sketches6m 39s
-
(Locked)
Basic sketch tools (line, circle, rectangle, and dimension)9m 17s
-
(Locked)
More sketch tools (spline, polygon, point, and text)10m 1s
-
(Locked)
Creating revolved features8m 3s
-
(Locked)
Using the extrude feature7m 52s
-
(Locked)
Understanding constraints7m 1s
-
(Locked)
Trimming and extending portions of a sketch3m 56s
-
(Locked)
Creating offset geometry and converting geometry4m 39s
-
(Locked)
Creating holes3m 45s
-
(Locked)
Creating assemblies and mate connectors7m 14s
-
(Locked)
System options, units, view, and measure3m 53s
-
-
-
-