From the course: Revit Architecture: Designing a House

Unlock the full course today

Join today to access over 22,400 courses taught by industry experts or purchase this course individually.

Adding finish floors to each room: Basement

Adding finish floors to each room: Basement

From the course: Revit Architecture: Designing a House

Start my 1-month free trial

Adding finish floors to each room: Basement

- [Narrator] Now that I have my finished flooring material up on the first floor, we now need to add finished flooring material down in the basement area and we'll find that it's really the same process. I want to start by zooming in to this upper right-hand side of the plan. Then, underneath the Architecture tab, select on Floor. Underneath Properties, make sure that VCT, this Vinyl Composition Tile has been selected. For the level, it should say Basement because that's the level that we're currently in underneath the project browser, for the Height Offset, quarter of an inch, it happens to be the overall thickness of this material that we're placing here down in the basement area. And now, we just need to start tracing around the outside perimeter. If I select here where we have a line, click the intersection of these two walls, then, let's draw a line straight down. Have that line come down to here, the line come over to here. Drop it down to here. Have it come over to here, and…

Contents