From the course: Revit 2020: Essential Training for MEP (Imperial)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding fixtures and domestic supply piping - Revit MEP Tutorial
From the course: Revit 2020: Essential Training for MEP (Imperial)
Adding fixtures and domestic supply piping
- [Instructor] The biggest problem we're going to have with adding components, plumbing fixtures, is the fact that the architect usually shows the fixtures in their model. And if they do that we can't connect our pipe to 'em. So what do we do? Well there's three different things we're going to do. Let's open our Plumbing Project-01. And zoom in on this area here. First thing I'd like to do is make a callout of this area. Go the to View tab, click the Callout button right here. Pick a big window right around this whole area here. Hit escape a couple times. Now let's double click on this bubble right here that gives us our callout. Instead of an 1/8th inch equals a foot, I'd like to change this scale but notice we cannot, 'cause our template is appended to a view template. So let's scroll down to View Template and click on Plumbing Plan. Now click on none, and click OK. Now let's change our scale to 1/4 inch equals a foot. I'm going to turn off that nasty floor hatch pattern, so type in…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Creating a plumbing view1m 55s
-
(Locked)
Adding fixtures and domestic supply piping9m 11s
-
(Locked)
Adding sanitary sloped piping4m 16s
-
(Locked)
Adding equipment2m 57s
-
(Locked)
Adding additional piping4m 10s
-
(Locked)
Creating a system3m 31s
-
(Locked)
Adding pipe accessories2m 46s
-
(Locked)
Tagging items3m 34s
-
(Locked)
Looking at the System Browser2m 19s
-
-
-
-