From the course: Revit 2022: Essential Training for MEP
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding mechanical equipment - Revit MEP Tutorial
From the course: Revit 2022: Essential Training for MEP
Adding mechanical equipment
- [Presenter] Adding mechanical equipment is easier than it sounds. The biggest problem isn't how we add it, it's where we add it. Remember, we're using a 3D program now we can't just start placing equipment and other components on the ground. We'll need it up in the air above the ceilings. Let's get started and jump into Revit. I have my mechanical project open. The first thing I'd like to do is let's go to the Annotate tab and then let's go to our project browser, mechanical HVC ceiling plans level one. Zoom in on this area here. The problem is we don't know how high these ceilings are. On the Annotate tab, let's click on Spot Elevation. If I hover over this we'll see we have eight feet or in metric it's 2438 millimeters that's good to know. We don't need to place this end, we're just going to kind of hover over these areas here. Eight feet, hit Escape a couple of times. Now let's go to the Systems tab. Let's find…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
(Locked)
Starting a mechanical project5m 37s
-
(Locked)
Adding mechanical equipment4m 58s
-
(Locked)
Adding air terminals5m 6s
-
(Locked)
Adding supply duct6m 1s
-
(Locked)
Adding return duct4m 7s
-
(Locked)
Adding duct accessories and fittings3m 48s
-
(Locked)
Sizing duct3m 15s
-
(Locked)
Tagging duct5m 48s
-
(Locked)
Adding zones and heating and cooling loads4m 55s
-
(Locked)
Adding insulation1m 53s
-
(Locked)
Adding hydronic piping3m 57s
-
(Locked)
-
-
-
-
-