From the course: Revit 2021: Essential Training for MEP
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding return duct - Revit MEP Tutorial
From the course: Revit 2021: Essential Training for MEP
Adding return duct
[Instructor] Adding return ducts is done exactly the same way we add supply ducts. We start with our VAV, then we work back to our diffusers. To get through this video, we're going to accomplish multiple tasks. First we're going to add our return diffusers, then our main ducts. Then, we're going to branch out to them just like we did in the last video. So let's jump into Revit, let's zoom into this area right in here. What I'd like to do is add some return diffusers so let's go to our systems tab, let's go to air terminal, and we'll just choose one that's here. Let's scroll up until we find return diffuser 24 by 24 face, 12 by 12 connection. So that, of course, would be 610 millimeters by 305 millimeters. Same problem; we need to set our elevation. So let's go ahead and set our elevation to eight feet, that would be 2438 millimeters. Now we can add this somewhere, like I'm going to hover over this grid line, hit…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Starting a mechanical project5m 37s
-
(Locked)
Adding mechanical equipment4m 58s
-
(Locked)
Adding air terminals5m 6s
-
(Locked)
Adding supply duct6m 1s
-
(Locked)
Adding return duct4m 7s
-
(Locked)
Adding duct accessories and fittings3m 48s
-
(Locked)
Sizing duct3m 15s
-
(Locked)
Tagging duct5m 48s
-
(Locked)
Adding zones and heating and cooling loads4m 55s
-
(Locked)
Adding insulation1m 53s
-
(Locked)
Adding hydronic piping3m 57s
-
-
-
-