From the course: Revit 2020: Essential Training for MEP (Metric)
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Adding zones and heating and cooling loads - Revit MEP Tutorial
From the course: Revit 2020: Essential Training for MEP (Metric)
Adding zones and heating and cooling loads
- [Lecturer] In this video, I'd like to add zones and heating and cooling loads. Let's jump into our mechanical project eight. Under mechanical HVAC floor plan, let's jump down to level one. Right click on level one. Let's duplicate view, let's duplicate with detailing. Let's rename level one copy one to level one zone plan. Let's zoom into here. Let's make our first zone, it's going to be this area up here. Let's go to the analyze tab. Let's go to zone. Add space is selected so we're going to grab office 101, reception 102, storage 103, office 103, and we'll grab the men's room. Scroll down til you find name. Two is not very descriptive, so we'll call it North West Corner. Apply. Click finish editing zone. Let's make a zone just of exam room here. Go to zone, select exam. For the name will be Exam 1003. Apply, very nice. Click finish editing zone. Let's make another one of the corridor. Let's go to zone, let's grab the corridor. The name is going to be Corridor 100. The architect…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
Starting a mechanical project8m 7s
-
(Locked)
Adding mechanical equipment6m 19s
-
(Locked)
Adding air terminals5m 10s
-
(Locked)
Adding supply ducts9m 33s
-
(Locked)
Adding return ducts7m 42s
-
(Locked)
Adding duct accessories and fittings6m 4s
-
(Locked)
Sizing ducts4m 46s
-
(Locked)
Tagging ducts6m 13s
-
(Locked)
Adding zones and heating and cooling loads6m 47s
-
(Locked)
Adding insulation2m 59s
-
(Locked)
Adding hydronic piping6m 21s
-
-
-
-
-