From the course: Rhino: T-Splines
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Bridging the legs
- [Voiceover] Let's look now at bridging the legs of the airplane together. I'm gonna focus now on the bottom section of these legs, and zoom in a bit. Make sure your T-splane doc is enabled. And I'm gonna go ahead and select the faces. Just focus on one side of the face, because with symmetry, you don't have to worry about the other side. And I'm gonna go ahead and run the extrude command. And we're gonna toggle to the scale tool, which is R. And we're gonna just grab the center box here and just scale it to the left. Then from here, we can go and grab the verts, which is the letter A. Then I'll just draw a bounding box over this vert here. Then we'll switch over to the right view. We'll select the move command, or translate, which is the icon right here, or you can hit the letter W. And use a free-form disc to shape it so it's a little more... Straight. And I'll take these two down here and move them over. So we have... Close enough that it looks like a square. Perfect. The next…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Importing the image reference7m 12s
-
(Locked)
Building the body of the plane9m 16s
-
(Locked)
Establishing symmetry to the body2m 35s
-
(Locked)
Pulling the rear fins8m 16s
-
(Locked)
Pulling the wings3m 32s
-
(Locked)
Building the legs6m 27s
-
(Locked)
Bridging the legs7m 16s
-
(Locked)
Adding edges to the body8m 49s
-
(Locked)
Forming the engine propeller11m 23s
-
(Locked)
Forming the tires10m 32s
-
(Locked)
Converting the body to a NURB2m 7s
-
(Locked)
Splitting the body & engine5m 22s
-
(Locked)
Filleting the edges2m 38s
-
(Locked)
Building the engines5m 6s
-
(Locked)
Shaping the cockpit5m 41s
-
(Locked)
Working on the cockpit6m 41s
-
(Locked)
-