From the course: Product Design: From CAD to 3D Model

Unlock the full course today

Join today to access over 22,500 courses taught by industry experts or purchase this course individually.

Building the tip

Building the tip

From the course: Product Design: From CAD to 3D Model

Start my 1-month free trial

Building the tip

“

- [Narrator] OK, moving along. Let's go ahead and build the tip of the screwdriver. Going to want to unlock our scene again, so just go back to the lock icon and right click. We want to now isolate these curves here, so let's go ahead and select just the curves involved in the modeling process. We're going to lock everything else in our scene, so again go back to this icon and we're going to left click on Invert Lock. What I want to do first is take this curve that we have here we created earlier, and I want to revolve it around this axis line right here. Let's go ahead an type in revolve. Start from any point on this curve and finish off anywhere on the same curve. Pull out and again just pay attention to the angles. You have zero to 360 and when you've confirmed it, just hit rick click again. And there we have it. From here, we could take the surface we just created and I want to close it up. If the edges of your surfaces are both planer, meaning completely flat, you can just use…

Contents