From the course: Rhino: T-Splines
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Filleting the edges
- [Voiceover] Let's take a look now at rounding off the edges between the seams of the body. I'm gonna go now, again, and take the three sections of the body, and hide everything else with this icon here. I'm gonna go ahead, and take the top section, and the bottom section, and use the Lock command. And now we can just focus on the other end here. I'm gonna use a FilletEdge command, just by typing it in. One key note you have to pay attention to is when you see breaks on the edges here, you have to use the ChainEdges command, so it wraps around the entire seam. So we're gonna start with a Radius of .1, and see if that works. I'm gonna click ChainEdges, and I'm gonna click just one edge, and it should wrap all the way around. And hit Enter, hit Enter again, then hit it again. We'll focus on the other body now, and see if that works. So I'm gonna go now, to the Unlock, which is right click on the same icon. Let's take this body here, and this time I'll use the Invert tool. And type in F…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Importing the image reference7m 12s
-
(Locked)
Building the body of the plane9m 16s
-
(Locked)
Establishing symmetry to the body2m 35s
-
(Locked)
Pulling the rear fins8m 16s
-
(Locked)
Pulling the wings3m 32s
-
(Locked)
Building the legs6m 27s
-
(Locked)
Bridging the legs7m 16s
-
(Locked)
Adding edges to the body8m 49s
-
(Locked)
Forming the engine propeller11m 23s
-
(Locked)
Forming the tires10m 32s
-
(Locked)
Converting the body to a NURB2m 7s
-
(Locked)
Splitting the body & engine5m 22s
-
(Locked)
Filleting the edges2m 38s
-
(Locked)
Building the engines5m 6s
-
(Locked)
Shaping the cockpit5m 41s
-
(Locked)
Working on the cockpit6m 41s
-
(Locked)
-