From the course: Rhino: T-Splines
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Forming the tires
- [Voiceover] Let's take a look at building the tires for the body and T-Spline. Before we do that, I'm going to go and select the propeller first. And go to our layers and let's right click on body and use Duplicate Layer. And we can just do prop, short for propeller and let's apply it to that layer using right click and Change Object Layer. And use a different color than the tan. We'll use orange. And from here we can just go and lock the body and lock the propeller so we can focus on building tires first. I'm going to switch over now to a different view. We can start with the right view here. Looks like we've located the centerpoint of the pivot, but looks like the pivot's a little bit off, where it's supposed to be. So what I'm going to do is use our nurb curve here so we can locate where the centerpoint of this wheel is. A good trick to doing that is to go into the circle tool here, and left click and hold. Select the third one over and what you want to do is zoom into the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
(Locked)
Importing the image reference7m 12s
-
(Locked)
Building the body of the plane9m 16s
-
(Locked)
Establishing symmetry to the body2m 35s
-
(Locked)
Pulling the rear fins8m 16s
-
(Locked)
Pulling the wings3m 32s
-
(Locked)
Building the legs6m 27s
-
(Locked)
Bridging the legs7m 16s
-
(Locked)
Adding edges to the body8m 49s
-
(Locked)
Forming the engine propeller11m 23s
-
(Locked)
Forming the tires10m 32s
-
(Locked)
Converting the body to a NURB2m 7s
-
(Locked)
Splitting the body & engine5m 22s
-
(Locked)
Filleting the edges2m 38s
-
(Locked)
Building the engines5m 6s
-
(Locked)
Shaping the cockpit5m 41s
-
(Locked)
Working on the cockpit6m 41s
-
(Locked)
-