From the course: Learning Rhino 6 for Mac
Unlock the full course today
Join today to access over 22,600 courses taught by industry experts or purchase this course individually.
Making sweep 2 rail surfaces - Rhino Tutorial
From the course: Learning Rhino 6 for Mac
Making sweep 2 rail surfaces
- [Instructor] Let's talk about Creating Surfaces, using the Sweep 2 command in Rhino for Mac. Sweep 2 makes a surface that passes through one or more profile curves, and those act as cross sections, along with two rail curves that define surface edges. Sweep 2 behaves almost exactly the same as Sweep 1, only it has two rail curves instead of one. So for some practice, I've opened up Surfaces Sweeps Stop 3M from the Exercise File, and here I'll be working in the Sweep 2A layer. So my layer's panel, I'll click to set that to the current layer and just hide everything else. We're looking at this set here where I have one rail, two rails, and my cross section curve. Let's go on up to the Surface menu and activate the Sweep 2 Rails command. So here I'm being prompted to select my first rail, and then my second rail, and it doesn't matter what order I select those in, and then cross section curve. So in this case I just have the…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Contents
-
-
-
-
-
-
Surface basics5m 29s
-
(Locked)
Making extrusion surfaces5m 46s
-
(Locked)
Basic lofted surfaces5m 32s
-
(Locked)
Lofting surfaces with loft options5m 50s
-
(Locked)
Surfaces from edge curves4m 22s
-
(Locked)
Creating revolved surfaces4m 21s
-
(Locked)
Making sweep 1 rail surfaces6m 27s
-
(Locked)
Making sweep 2 rail surfaces6m 57s
-
(Locked)
Network surface creation6m 36s
-
(Locked)
Analyzing surface direction3m 4s
-
(Locked)
Analyzing surface radius and curvature4m 53s
-
(Locked)
Analyzing surface continuity5m 49s
-
(Locked)
Editing surface control points5m 53s
-
(Locked)
Exploding and joining surfaces4m 37s
-
(Locked)
Smoothing surfaces4m 34s
-
(Locked)
Extending surfaces3m 7s
-
(Locked)
Splitting surfaces4m 9s
-
(Locked)
Trimming surfaces5m 28s
-
(Locked)
Offsetting surfaces6m 18s
-
(Locked)
Matching surfaces5m 10s
-
(Locked)
Filleting surfaces6m 46s
-
(Locked)
Bending surfaces4m 55s
-
(Locked)
Rebuilding surfaces5m 15s
-
-
-
-
-
-