Add it to the library - SOLIDWORKS Tutorial

Contents

• Introduction Introduction

  • Welcome

    1m 12s
  • What you should know

    29s
  • Using the exercise files

    28s
• 1. Set Up 1. Set Up

  • (Locked)
    Create and name a folder

    2m 52s
• 2. Add a Custom Library to SOLIDWORKS 2. Add a Custom Library to SOLIDWORKS

  • (Locked)
    Link the folder to the Design Library

    1m 4s
• 3. Set Up the Folders for a Custom Library 3. Set Up the Folders for a Custom Library

  • (Locked)
    Library naming standards

    1m 3s
  • (Locked)
    Design Library folder locations

    2m 24s
• 4. Create Custom Annotations for Drawings 4. Create Custom Annotations for Drawings

  • (Locked)
    Import a Word document

    6m 12s
  • (Locked)
    Use an existing annotation in a drawing

    1m 38s
• 5. Create a Grain Direction Annotation for Sheet Metal 5. Create a Grain Direction Annotation for Sheet Metal

  • (Locked)
    Create a grain direction annotation

    4m 38s
  • (Locked)
    Add it to the library

    1m 17s
  • (Locked)
    Use it in a sheet metal drawing

    6m 59s
• 6. Create a Forming Tool for Sheet Metal 6. Create a Forming Tool for Sheet Metal

  • (Locked)
    Assign a library for forming tools

    5m 26s
  • (Locked)
    Modify an existing forming tool

    2m 25s
  • (Locked)
    Add a forming tool to the Design Library

    4m 23s
  • (Locked)
    Add an emboss to a sheet metal part

    1m 21s
• 7. Create a Hole Pattern for a Circuit Board Component 7. Create a Hole Pattern for a Circuit Board Component

  • (Locked)
    Create a hole pattern block

    2m 57s
  • Add the hole pattern block to the library

    37s
  • (Locked)
    Add a hole pattern feature to a PCB

    1m 4s
• 8. Save a Feature to the Design Library 8. Save a Feature to the Design Library

  • (Locked)
    Create a feature to be reused

    5m 17s
  • (Locked)
    Save the feature to the Design Library

    45s
  • (Locked)
    Add a Design Library feature to a model

    58s
• 9. Save a Block to the Design Library 9. Save a Block to the Design Library

  • (Locked)
    Create a block from a sketch

    1m 48s
  • (Locked)
    Add a block to the Design Library

    59s
  • (Locked)
    Add the block to a sketch in a new model

    1m 40s
• Conclusion Conclusion

  • (Locked)
    Next steps

    1m 41s