Add the seat stays - SOLIDWORKS Tutorial

Contents

• Introduction Introduction

  • Introduction to modeling a bicycle frame

    48s
  • What you should know and how to use the exercise files

    2m 34s
• 1. Design the Theoretical Frame 1. Design the Theoretical Frame

  • The scope of this design

    1m 27s
  • Why use CAD?

    1m 44s
  • Understand the anatomy of a bicycle

    3m 7s
  • Create the frame geometry

    1m 52s
• 2. Building the Front Triangle 2. Building the Front Triangle

  • Where to start? Create the bottom bracket shell

    5m 58s
  • Create an assembly with the frame layout

    8m 1s
  • Add the head tube

    5m 43s
  • Add the seat tube

    5m 13s
  • Add the top tube

    5m 48s
  • Add the down tube

    6m 2s
  • Experiment with geometry changes

    3m 16s
• 3. Finishing the Frame with the Rear Triangle 3. Finishing the Frame with the Rear Triangle

  • Plan out the rear triangle

    5m 57s
  • Add the seat stays

    6m 14s
  • Add chain stays

    6m 19s
  • Model the dropouts

    7m 28s
  • Add the dropouts and adjust the frame

    6m 25s
  • Mirror the rear triangle parts

    4m 16s
  • Create the chain and seat stay bridges

    4m 54s
• 4. Frame Finishing Touches 4. Frame Finishing Touches

  • Add brake mounts

    6m 23s
  • Add extra frame details

    7m 29s
• 5. Adding Components 5. Adding Components

  • Develop the model by adding off-the-shelf parts

    4m 46s
  • Finish the model by adding the seat and front fork

    4m 8s
• Conclusion Conclusion

  • Create tube drawings

    6m 34s
  • Next steps

    1m 2s